Device Technical Specification
Audible Receiver:-
Power: 3 x AA Alkaline Batteries or Micro USB power supply
Battery Life: Average 5-7 months (based on 30 activations per day)
Volume: 80-96DB
Working Temp: -10c to +60c
Receiving Frequency: 433.94MHz
Workable environment humidity:<80%
Storage temperature: -20c to +70c
PIR Sensor (transmitter):-
Power: 3 x AAA Alkaline Batteries or Micro USB power supply
Battery Life: Average 5-7 months (based on 30 activations per day)
Optimal working Temp: -10c to +33c
Transmitting Frequency: 433.94MHz
Workable environment humidity:<80%
Storage temperature: -20c to +70c
Remote control (transmitter):-
Power: 1 x 27amp 12v Alkaline Battery (28mm x 77mm)
Battery Life: Average 8-12 months (based on 30 activations per day)
Optimal working Temp: -10c to +45c
Transmitting Frequency: 433.94MHz
Workable environment humidity:<80%
Storage temperature: -20c to +70c
Reset/Delete all transmitters
CAUTION: The following instructions will de-link/de-pair all PIR and Remote control fobs from the Audible receiver device chosen. Thereafter you will need to re-link each PIR & Remote back to Audible receiver unit in order for the system to work (see Set up & Pairing Page)
As per the image above, to de-link both the PIR sensors and remote control units fro the Audible receiver unit, first turn the Audible receiver unit off. Hold the top tower button to the right hand edge of the unit (you should hear 4 x tone notes to denote unit has turned off). Then press the ‘Horn button’ below and hold for at least 10 seconds (ignore unit if it beeps ‘du’ once and blue light shows, just keep holding the button down). After 10 seconds you should the red light flash 3 times and hear 3 x audible beeps ‘Du, Du, Du’. Should this be the case then all PIR sensors and Remote control have been removed/de-linked from the Audible receiver unit as required.